RESOURCES MECHANICAL << IESL: Instrumentation Engineering Services Ltd - Best Calibration Company in Bangladesh - Best Accreditation Company in Bangladesh - Repair, Maintenance and Measuring Equipment Company in Bangladesh

RESOURCES Resources Mechanical Electrical Thermal Chemical FAQ

Mass & Volume
These Weights used in calibration are Highly Accurate and Precision Balances. There are Many Class and Different weights of Accurate and Precision Balance. Please see Our Reference Balances

Parameter	Master Equipment Used for Calibration	Range Of Measurement
Mass Weights	OIML E1 & E2 Class Weight with DAKKS Certificate and Precision Balances	1mg
		2mg
		5mg
		10mg
		20mg
		50mg
		100mg
		200mg
		500mg
		1g
		2g
		5g
		10g
		20g
		50g
		100g
		200g
		500g
		1kg
		2kg
		5kg
		10kg
		20kg

Parameter	Master Equipment for Calibration	Range Of Measurement
Mass Weights	OIML F1 & F2 Class Weight with DAKKS Certificate and Precision Balances – Used for Calibration of M1 & M2 Class Weights	1mg
		2mg
		5mg
		10mg
		20mg
		50mg
		100mg
		200mg
		500mg
		1g
		2g
		5g
		10g
		20g
		50g
		100g
		200g
		500g
		1kg
		2kg
		5kg
		10kg
		20kg
Pipette	Manual mass comparators combine metrological expertise and integrated OIML R 111-1 workflows. Mass Comparator │ Electronic Balance │ Printer │ Stand	1 ml to 100 ml
Burette		10 ml to 100 ml
Volumetric Flask/ Measuring Cylinder/ Beaker		10 ml to 100 ml 500 ml 100 ml
Standard Weight		0 to 5 ton
Weight Scale Calibrator	Calibarte Standard Weight or Load Cell	0 to 5 ton

Dimension
Dimensional calibration services were designed to ensure that your hand tools and measuring instruments provide reliable, precise, traceable measurement results. From length measurement calibration of instruments such as micrometers, calipers, gages or tape measuresour industry leading dimensional instrument calibration capabilities are designed to reduce risk and inaccuracy in your measurements.

Parameter	Master Equipment Used for Calibration	Range of Measurement
Measuring tape	Digital Tape Calibrator	0-50 Meter
Steel Scale	Digital Tape calibrator	0-150 cm
External Micrometer LC: 0.001 mm LC: 0.01 mm	Grade 0 Gauge Block Set	0 to 25 mm 0 to 25 mm
Plunger Dial Gauge LC: 0.001 mm LC: 0.01 mm	Grade 0 Gauge Block Set
Vernier Calipers LC: 0.01 LC: 0.01 LC: 0.02		0 to 300 mm 0 to 1000 mm 0 to 1000 mm

Pressure

Parameter	Master Equipment Used for Calibration	Range of Measurement
Automatic Pressure Calibrator	Precision Automation Pressure to calibrate Smart Pressure Transmitter & Manual Pressure gauges.	-0.9550 – 70.00 bar
Handled Pressure Calibrator	Micro manometer is a new and smart formeasuring Differential pressure and Air velocity with Pitot tube.	-1000 to1000Pa
Hydraulic Pressure Calibrator	The Portable Oil Operated Comparator pump has Internal volume of 30 cc. One side is fitted with our Precision Digital Pressure Indicator with an accuracy Of 0.05% of Full Scale. The other side is connected To any Pressure Instrument under test.	0 to 10,000 psi
Precision Digital Pressure Gauges	Digital Pressure Gauge combines the high accuracy of digital electronics with the convenience and ease of use Of an analog test gauge. Accuracy: ± 0.05%FS.	0 – 140 Bar
Calibration Hand Pumps	Capable of Generate both Pressure and vacuum. Completely isolated vernier prevents heat transfer from hand Precision valve for bleed control	-1 to 35 Bar
Calibration Pneumatic Pumps	The high pressure hand pump is a revolutionary portable pneumatic pump that can generate pressure up to 2000 psi (140 bar) and vacuum to -14 psi (-0.9 bar) Quickly and easily.	0 – 2000 PSI -14 to 0 PSI

Other Parameter’s

Parameter

Master Equipment Used for Calibration

Range of Measurement

Stop Watch

Multi-function stopwatch
displays a digital up/down
timer, temperature, humidity
And heat index.

0 – 24 Hours

Flow Meter

Flow meter was specifically
designed for the industry
to meet the challenges of
Measuring Flows.

Our Flowmeter’s are capable
to measure all types of
Liquid, steam, Air & Gases.
We have Mass flowmeter for
Lab calibration and
Ultrasonic Portable flowmeter
For onsite calibration.

– 60,000 m3/h

At 400 mm dia

HART Communicator

The Field Communicator is
designed to operate with a
wide range of HART and
FOUNDATION fieldbus
devices independent of
device manufacturer.

Used to Calibrate any Device With HART Protocol.

Thickness Meter

Coating Thickness Gauge
Provides fast, non-destructive,
accurate coating
measurements on steel
And non-ferrous metals.

Ferrous: 0-140 mils
(0-3500um)

Non-Ferrous: 0-120 mils
(0-3000um)

Digital Force

digital force gauge with
remote sensor is ideal for
measurements in confined
or difficult to reach locations.
display shows force value,
unit, and peak.

Pounds: 4400 (1 lbf)
Newtons: 20.00 (0.01 KN)

Accuracy: ± 0.2% F.S., ± 1 LSD

Torque

Torque Wrench Calibrator

0 – 500KN

Call Now: +88017-5556-9956

RESOURCES

Leave a Reply Cancel reply

About IESL

Menu

Certificate of Accreditation

Contact Us