Wired Thermal Validation Archives | Instrumentation Engineering Services Ltd. https://ieslbd.com/product-tag/wired-thermal-validation/ Accredited calibration laboratory, accredited inspection body and instrument supplier Mon, 20 Oct 2025 18:41:18 +0000 en-US hourly 1 https://wordpress.org/?v=6.9 https://ieslbd.com/wp-content/uploads/2021/04/icon-150x150.png Wired Thermal Validation Archives | Instrumentation Engineering Services Ltd. https://ieslbd.com/product-tag/wired-thermal-validation/ 32 32 Temperature Verification Software Power 3000 https://ieslbd.com/service/temperature-verification-software-power-3000/ https://ieslbd.com/service/temperature-verification-software-power-3000/#respond Mon, 20 Oct 2025 18:40:34 +0000 https://ieslbd.com/?post_type=product&p=12362 calibration, verify, Report, Compliance and Security

The post Temperature Verification Software Power 3000 appeared first on Instrumentation Engineering Services Ltd..

]]> Temperature Verification Software Power 3000

 

calibration

● Multi-point calibration, single-point or multi-point calibration can be achieved

● Various wired calibration modes, including manual or manual + automatic mixed calibration

● In the fully automatic calibration mode, it can automatically communicate with the probe or dry well to automatically complete the calibration

● Support multi-stage compensation and calibration of wireless recorders

● With post-verification function

verify

 

● Supports three types of verification: temperature, humidity, and pressure. The verification channel can be expanded infinitely

● Support wired, wireless, and hybrid (wired + wireless) authentication methods

● Support multiple verification start and stop methods

● Can run verification on multiple devices in real time, with no limit on the number of verifications

● Wired verification can observe verification data in real time: trend chart, kill rate calculation, temperature statistics calculation, etc.

● During wireless verification, you can close the software after running it in the background

Report

 

● Both calibration and verification can generate original unchangeable calibration data and verification data

● Calibration data can be split into multiple reports as needed

● Verification data can be divided into multiple cycles and multiple stages

● Report content can be flexibly filtered to display important information

● Different parameters can be set to calculate F0 value, FH value, A0 value, etc.

● Calculate cold spots, hot spots, uniformity, fluctuation, etc.

● The verification report calculation content is comprehensive and rich, meeting different calculation needs

● Calibration or verification data can be backed up and restored separately

● Can output files in different formats such as PDF, CSV, Excel, etc.

● Detailed report filtering capabilities

Compliance and Security

 

● Comply with FDA 21CFR Part 11 requirements for electronic records, audit trails and electronic signatures

● Comply with EU EN554:1994 on the validation and routine control requirements of moist heat sterilization of medical devices

● Level 3 user management authority

● Audit trail, detailed log tracking records can be used to check every step of the user’s actions

● Detailed log filtering function, convenient for viewing operation records

● Safely back up data offsite

The post Temperature Verification Software Power 3000 appeared first on Instrumentation Engineering Services Ltd..

]]> https://ieslbd.com/service/temperature-verification-software-power-3000/feed/ 0 Trolley instrument box https://ieslbd.com/service/trolley-instrument-box/ https://ieslbd.com/service/trolley-instrument-box/#respond Mon, 20 Oct 2025 18:17:59 +0000 https://ieslbd.com/?post_type=product&p=12360 Product Overview
The verification instrument, modules, sensors and accessories can be placed in the instrument case, which has wheels and a handle for easy carrying.

The post Trolley instrument box appeared first on Instrumentation Engineering Services Ltd..

]]>

Trolley instrument box

Main features
:Small size

● Strong and durable

● Reasonable layout, the whole system can be placed in one instrument box

model CCT
Material: Aluminum alloy, density board, EVA foam
Load-bearing capacity: 40kg
Dimensions (L x W x H): 523×326×261mm
quality: 6.7kg

The post Trolley instrument box appeared first on Instrumentation Engineering Services Ltd..

]]> https://ieslbd.com/service/trolley-instrument-box/feed/ 0 Stainless steel tunnel oven bracket https://ieslbd.com/service/stainless-steel-tunnel-oven-bracket/ https://ieslbd.com/service/stainless-steel-tunnel-oven-bracket/#respond Mon, 20 Oct 2025 18:14:46 +0000 https://ieslbd.com/?post_type=product&p=12358 Product Overview
: This is a device that fixes the sensor on the mesh belt when verifying the temperature of the tunnel oven.

The post Stainless steel tunnel oven bracket appeared first on Instrumentation Engineering Services Ltd..

]]>

Stainless steel tunnel oven bracket

Main features
:Multiple rail combinations, scalable length

● 316L stainless steel, strong and durable

● Quick operation

● Safe and reliable

model SS-TOB16
Number of Sliders: 16
Probe hole diameter: 4.2mm
Bracket height: Adjustable
Material: 316L stainless steel
Ordering Information: SS-TOB10-UNIT1 1 guide rail, up to 400 mm long

SS-TOB10-UNIT2 2 guide rails, up to 750 mm long

SS-TOB10-UNIT3 3 rails, up to 1100mm

SS-TOB10-UNIT4 4 rails, up to 1450mm long

SS-TOB10-UNIT5 5 rails, up to 1800mm long

The post Stainless steel tunnel oven bracket appeared first on Instrumentation Engineering Services Ltd..

]]> https://ieslbd.com/service/stainless-steel-tunnel-oven-bracket/feed/ 0 Stainless steel wire guide https://ieslbd.com/service/stainless-steel-wire-guide/ https://ieslbd.com/service/stainless-steel-wire-guide/#respond Mon, 20 Oct 2025 18:12:16 +0000 https://ieslbd.com/?post_type=product&p=12356 Product Overview
: This device provides sealing when the sensor enters high-temperature pressure equipment.

The post Stainless steel wire guide appeared first on Instrumentation Engineering Services Ltd..

]]>

Stainless steel wire guide


Main Features

● Maximum number of leads: 32

● 316L stainless steel, strong and durable

● Quick operation

● Safe and reliable

model SS-FT16
Number of slots: 16
Maximum number of leads: 32
Seal material: Silicone
Withstand voltage: -100kPa to 400kPa G
Operating temperature: -60℃ to 200℃
Chuck diameter: 50.5mm
Dimensions (maximum diameter x height): Φ84×104mm
Material: 316L stainless steel
quality: 1455g
Notice: Please install the chuck in place and tighten the rod to ensure safety when using it.
Other optional accessories: Stainless steel chuck thread reducer

Stainless steel chuck to chuck reducer

Stainless steel tee

The post Stainless steel wire guide appeared first on Instrumentation Engineering Services Ltd..

]]> https://ieslbd.com/service/stainless-steel-wire-guide/feed/ 0 Digital Pressure Sensor DPS https://ieslbd.com/service/digital-pressure-sensor-dps/ https://ieslbd.com/service/digital-pressure-sensor-dps/#respond Mon, 20 Oct 2025 18:09:21 +0000 https://ieslbd.com/?post_type=product&p=12354 Product Overview:
This sensor is used for pressure equipment verification. It uses the world's most advanced test elements and structural design, and has excellent high temperature resistance.

Applications:
● Steam sterilizer
● Water bath sterilizer
● Freeze dryer

The post Digital Pressure Sensor DPS appeared first on Instrumentation Engineering Services Ltd..

]]>

Digital Pressure Sensor DPS

Main features
● High temperature resistance: 140℃
● Fully digital signal transmission, accuracy is not affected by connector plugging and unplugging

model DPS-5 high temperature type 
Pressure indicators
Number of channels: 1
Measuring range: 0.1kPa to 500kPa ABS
Accuracy: ±0.25%FS (1.25kpa/12.5mbar)
Resolution: 0.01kPa
other
Head installation method: Φ50.5mm chuck
Head shell material: 316L stainless steel
Head operating temperature: -20℃ to 140℃
Head: 120mm
Conductor outer material: PU
Wire diameter: Φ6mm
Tail terminal: Anti-drop aviation universal plug
Total length: 5m
Sensor core origin: Germany
Notice: Do not touch the pressure measuring part on the chuck surface to avoid affecting the accuracy or damaging it.
Ordering Information: DPS-5 5m

The post Digital Pressure Sensor DPS appeared first on Instrumentation Engineering Services Ltd..

]]> https://ieslbd.com/service/digital-pressure-sensor-dps/feed/ 0 Digital Temperature and Humidity Sensor THS https://ieslbd.com/service/digital-temperature-and-humidity-sensor-ths/ https://ieslbd.com/service/digital-temperature-and-humidity-sensor-ths/#respond Mon, 20 Oct 2025 18:03:30 +0000 https://ieslbd.com/?post_type=product&p=12352 Product Overview
: This sensor is used for humidity equipment verification. It uses the world's most advanced measuring elements and has high accuracy and stability.

Applications
: Constant temperature and humidity chambers
, incubators
, cold storages
, and workshops.

The post Digital Temperature and Humidity Sensor THS appeared first on Instrumentation Engineering Services Ltd..

]]>

Digital Temperature and Humidity Sensor THS

Key Features
● High accuracy : ±2%RH
● Fully digital signal transmission, accuracy is not affected by connector plugging and unplugging

model THS20-5  high precision universal type 
Temperature and humidity sensors
Temperature/humidity channels: 1
Temperature measurement range: 0℃ to 100℃
Temperature accuracy : ±0.3°C (15°C to 35°C)
Temperature resolution: 0.01℃
Humidity measurement range : 0%RH to 100%RH
Humidity accuracy : ±2%RH (25°C, 20%RH to 90%RH)
Humidity resolution: 0.01%RH
other
Head packaging material: Stainless steel sintering
Conductor outer material: PU
Head size (diameter x length): Φ15.3×83.5mm
Wire diameter: Φ3.8mm
Tail terminal: Anti-drop aviation universal plug
Total length: 5m
Sensor core origin: Switzerland
Head protection level: IP50
Notice: Do not use in water
Ordering Information: THS20-5 5m

The post Digital Temperature and Humidity Sensor THS appeared first on Instrumentation Engineering Services Ltd..

]]> https://ieslbd.com/service/digital-temperature-and-humidity-sensor-ths/feed/ 0 Dry Heat Resistance Temperature Sensor DRS https://ieslbd.com/service/dry-heat-resistance-temperature-sensor-drs/ https://ieslbd.com/service/dry-heat-resistance-temperature-sensor-drs/#respond Mon, 20 Oct 2025 17:58:16 +0000 https://ieslbd.com/?post_type=product&p=12348 Product Overview
: This sensor is used for temperature verification of dry heat equipment. It uses a 3-wire platinum resistor PT100 as a temperature sensing element and has extremely high accuracy and stability .


● Dry heat sterilizer
● Tunnel oven   

The post Dry Heat Resistance Temperature Sensor DRS appeared first on Instrumentation Engineering Services Ltd..

]]>

Dry Heat Resistance Temperature Sensor DRS

Main features
: High accuracy Good long-term stability, can calibrate and verify multiple devices at one time, saving a lot of working time and cost Resistant to high-intensity mechanical shocks High temperature 400℃ active use Prevents chips from contaminating equipment and the environment

model DRS-10 high precision general purpose 
Graduation number: PT100
Wire system: 3 lines
Head operating temperature: 0℃ to 400℃
Wire operating temperature: 0℃ to 400℃
Accuracy : ±0.1℃
Head features: earthquake resistance
Conductor characteristics: Resistant to folding
Tail features: none
Head packaging material: 316L stainless steel
Wire insulation material: polyimide
Conductor outer material: 304 stainless steel
Head size (diameter x length): Φ3.5×35mm
Wire diameter: Φ2.5mm
Tail terminal: Crimp terminals
Tail terminal size (width x length): 1.3×8mm
Total length: 10m
Origin of temperature sensing element: Germany
Wire Origin: China
Notice: Do not use in water
Ordering Information: DRS-6 6m

DRS-8 8m

DRS-10 10m

DRS-12 12m

DRS-15 15m

DRS-20 20m

DRS-25 25m

The post Dry Heat Resistance Temperature Sensor DRS appeared first on Instrumentation Engineering Services Ltd..

]]> https://ieslbd.com/service/dry-heat-resistance-temperature-sensor-drs/feed/ 0 Wet Heat Thermocouple Temperature Sensor WTS https://ieslbd.com/service/wet-heat-thermocouple-temperature-sensor-wts/ https://ieslbd.com/service/wet-heat-thermocouple-temperature-sensor-wts/#respond Mon, 20 Oct 2025 17:55:18 +0000 https://ieslbd.com/?post_type=product&p=12346 Product Overview
: This sensor is used for temperature verification of wet heat equipment and uses a 2-wire T-type thermocouple as the temperature sensing material.

Applicable to

● Steam sterilizer

● Water bath sterilizer

● Freeze dryer

● Constant temperature and humidity chamber

● Incubator

The post Wet Heat Thermocouple Temperature Sensor WTS appeared first on Instrumentation Engineering Services Ltd..

]]>

Wet Heat Thermocouple Temperature Sensor WTS

Main features:
● Fast thermal response
● Unique TTP full Teflon protection technology, super waterproof and vibration-resistant, and resistant to high temperatures.

model WTS-10 Quick Response Type 
Graduation number: T-type
Wire system: 2-wire
Head operating temperature: -200℃ to 200℃
Wire operating temperature: -200℃ to 200℃
Accuracy : ±0.25℃
Head features: Waterproof and shockproof
Line characteristics: Waterproof, fold-resistant
Tail features: Anti-pressure water diversion
Wire core: Copper and Constantan, 7 strands x 32 gauge
Head packaging technology: TTP full Teflon protection
Wire insulation material: Teflon
Conductor outer material: Teflon
Head size (diameter x length): Φ3×20mm
Wire size (width x height): 2.3×1.4mm
Tail terminal: Crimp terminals
Tail terminal size (width x length): 1.3×8mm
Total length: 10m
Wire Origin: USA
Notice: Please keep the tail environment temperature stable, because the thermocouple requires cold end compensation, and the temperature change of the cold end (tail) environment will affect the accuracy.
Please consult the sales engineer for details.
Ordering Information: WTS-6 6m

WTS-8 8m

WTS-10 10m

WTS-12 12m

WTS-15 15m

WTS-20 20m

WTS-25 25m

The post Wet Heat Thermocouple Temperature Sensor WTS appeared first on Instrumentation Engineering Services Ltd..

]]> https://ieslbd.com/service/wet-heat-thermocouple-temperature-sensor-wts/feed/ 0 General Line GCB https://ieslbd.com/service/general-line-gcb/ https://ieslbd.com/service/general-line-gcb/#respond Mon, 20 Oct 2025 17:50:42 +0000 https://ieslbd.com/?post_type=product&p=12344 Product Overview

Universal cables are accessories used to connect the verifier with various modules and are commonly used for all temperature verification products of Yangong.

The post General Line GCB appeared first on Instrumentation Engineering Services Ltd..

]]>

General Line GCB


Main features
: Anti-drop aviation universal plug, reliable and durable, quick to operate

● Professional anti-interference design

● High-quality wire

model GCB
Operating temperature: -40℃ to 85℃
Operating humidity: 0%RH to 90%RH
Conductor outer material: PVC
Wire diameter: Φ4mm
Plug terminals: Anti-drop aviation universal plug
Ordering Information: GCB-1.5 1.5m

GCB-5 5m

GCB-20 20m

GCB-50 50m

GCB-100 100m

The post General Line GCB appeared first on Instrumentation Engineering Services Ltd..

]]> https://ieslbd.com/service/general-line-gcb/feed/ 0 Wet Heat Resistance Temperature Sensor WRS & FWRS https://ieslbd.com/service/wet-heat-resistance-temperature-sensor-wrs-fwrs/ https://ieslbd.com/service/wet-heat-resistance-temperature-sensor-wrs-fwrs/#respond Mon, 20 Oct 2025 17:47:41 +0000 https://ieslbd.com/?post_type=product&p=12342 Product Overview
: This sensor is used for temperature verification of wet heat equipment. It uses a 3-wire platinum resistor PT100 as the temperature sensing element and has extremely high accuracy and stability.

Applicable to
● Steam sterilizer
● Water bath sterilizer
● Freeze dryer
● Constant temperature and humidity chamber
● Incubator

The post Wet Heat Resistance Temperature Sensor WRS & FWRS appeared first on Instrumentation Engineering Services Ltd..

]]>

Wet Heat Resistance Temperature Sensor WRS & FWRS


Main features:
● High accuracy
● Good long-term stability, can calibrate and verify multiple devices at one time, saving a lot of working time and cost
● Unique TTP full Teflon protection technology, super waterproof and vibration-resistant, and resistant to high temperatures.

model WRS-10 high precision universal type  FWRS-10 high precision thin flat 
Graduation number: PT100
Wire system: 3 lines
Head operating temperature: -200℃ to 200℃
Wire operating temperature: -200℃ to 200℃
Accuracy : ±0.1℃
Head features: Waterproof and shockproof
Line characteristics: Waterproof, fold-resistant
Tail features: Anti-pressure water diversion
Head packaging technology: TTP full Teflon protection
Wire insulation material: Teflon
Conductor outer material: Teflon
Head size (diameter x length) Φ4×40mm Φ3×30mm
Wire size: Φ2.7mm 2.3×1mm
Tail terminal: Crimp terminals
Tail terminal size (width x length): 1.3×8mm
Total length: 10m
Origin of temperature sensing element: Germany
Wire Origin: China
Notice: Do not over-compress the wires
Ordering Information: WRS-6 6m

WRS-8 8m

WRS-10 10m

WRS-12 12m

WRS-15 15m

WRS-20 20m

WRS-25 25m

 FWRS-6 6m

FWRS-8 8m

FWRS-10 10m

FWRS-12 12m

FWRS-15 15m

FWRS-20 20m

FWRS-25 25m

The post Wet Heat Resistance Temperature Sensor WRS & FWRS appeared first on Instrumentation Engineering Services Ltd..

]]> https://ieslbd.com/service/wet-heat-resistance-temperature-sensor-wrs-fwrs/feed/ 0